Installing Rock Panels on Different Substrates: What You Need to Know

Installing Rock Panels on Different Substrates: What You Need to Know

One of the major advantages of Rock Panels is their versatility. They can be installed on a wide range of substrates, making them suitable for a variety of interior and exterior applications. Whether you’re working with wood, concrete, steel, or another material, understanding the installation process for each substrate is crucial to ensure a secure, long-lasting result. This guide will walk you through the key considerations and best practices for installing Rock Panels on different surfaces, including specific tips for each type of substrate.

General Installation Overview Before diving into substrate-specific guidelines, it’s important to understand the basic installation process for Rock Panels. The panels are designed to interlock using a shiplap jointing system, which makes installation straightforward. Most installations require a combination of adhesive and screws to securely fix the panels in place.

No matter the substrate, make sure the surface is clean, dry, and free of dust, debris, or contaminants. Proper surface preparation is critical to ensure strong adhesion and prevent long-term issues like warping or shifting. Also, take the time to plan the layout of your panels, ensuring you achieve a seamless, natural-looking finish.

Now, let’s explore the specific requirements for each type of substrate.

 


 

Installing Rock Panels on Wood

Wood is one of the most common substrates for Rock Panel installations, especially in interior applications like feature walls or fireplace surrounds. Because wood is a lightweight and easy-to-work-with material, it’s a great match for Rock Panels.

Key Steps:

  1. Clean the Surface: Ensure the wood surface is free of dust and debris. If you’re installing over a previously painted or sealed wooden surface, check that the paint is not flaking or peeling. Sand any areas that are uneven or rough.
  2. Apply Primer (if needed): For untreated wood, applying a primer such as Gorilla Primer 150 can help improve the bond between the adhesive and the wood.
  3. Adhesive Application: Use a high-quality adhesive, such as Gorilla Fix All High Tack, applying a continuous 7mm bead to the back of the panel. Be sure to avoid any grooves to maintain a weather-tight seal.
  4. Fixing the Panels: Press the panels into place and secure them with screws at regular intervals along the top lip. For indoor applications, general wood screws are sufficient, but for outdoor applications, consider using stainless steel screws to prevent rust.

Tips for Success:

  • Ensure the wood is fully dry before installation. Moisture in the wood can affect the bond of the adhesive.
  • If working with plywood or engineered wood, ensure the substrate is properly supported and level.

 


 

Installing Rock Panels on Concrete or Masonry

Concrete and masonry substrates, commonly found in outdoor spaces or older homes, are highly durable but require special preparation to ensure a secure installation.

Key Steps:

  1. Surface Preparation: Concrete and masonry must be completely clean, dry, and free of contaminants. Use a stiff brush or pressure washer to remove dirt, moss, or debris from the surface. For retrofitting, check for any cracks or damage and repair them before starting the installation.
  2. Apply Primer: Apply a suitable primer, such as Gorilla Primer 150, to the concrete or masonry surface. This helps improve adhesion, especially in outdoor installations where moisture may be present.
  3. Adhesive Application: Apply the adhesive to the back of each panel, ensuring you follow the recommended 7mm bead pattern. Avoid getting adhesive into the panel grooves.
  4. Fixing the Panels: Press the panel firmly into place, using stainless steel screws to secure the panels through the top lip at regular intervals. For masonry, use expanded screws or anchors to ensure a solid bond.

Tips for Success:

  • Be mindful of moisture in concrete or masonry. Ensure the surface is dry and free from moisture to avoid long-term adhesion issues.
  • In colder climates, consider installing during milder weather to avoid issues with freezing or expansion.

 


 

Installing Rock Panels on Steel or Metal

Steel and other metal substrates are often found in commercial or industrial applications, as well as some modern home designs. Installing Rock Panels on these surfaces is straightforward, but proper surface preparation is critical to ensure a long-lasting result.

Key Steps:

  1. Clean the Surface: Remove any rust, dirt, or oil from the metal surface using an appropriate cleaner or rust remover. For galvanised steel, clean with Gorilla 696 Surface Activator to remove any surface contaminants.
  2. Adhesive Application: Apply the adhesive in the same 7mm continuous bead pattern on the back of the Rock Panels. Metal surfaces typically require a stronger adhesive bond, so be sure to follow the manufacturer’s recommendations.
  3. Fixing the Panels: For metal substrates, use screws that are compatible with metal surfaces, such as self-tapping screws. Stainless steel screws are recommended for outdoor installations to prevent rust.

Tips for Success:

  • Metal surfaces can expand and contract with temperature changes, so ensure the panels are securely fixed to prevent movement over time.
  • Regularly inspect outdoor installations for signs of rust or wear, especially in coastal environments where salt air may accelerate corrosion.

 


 

Installing Rock Panels on Gib

Gib (plasterboard) is a lightweight and commonly used material for interior walls in New Zealand. While it provides a smooth surface for decoration, it requires careful preparation to ensure a secure and lasting installation of Rock Panels.

Key Steps:

  1. Surface Preparation: Ensure the Gib surface is clean and free of dust or debris. If you’re installing Rock Panels over previously painted Gib, wash the surface with a mild detergent, such as Sugar Soap, to remove any contaminants or grease that might prevent proper adhesion.
  2. Apply Sealer: It is recommended to apply an oil-based sealer to the Gib surface before beginning the installation. This step helps create a stable base for the adhesive to bond properly and prevents any issues related to moisture absorption in the plasterboard.
  3. Adhesive Application: Use a high-quality adhesive, like Gorilla Fix All High Tack, and apply a continuous 7mm bead to the back of the Rock Panel. Ensure the thickness of the adhesive remains at least 2-3mm after pressing the panel into place. Avoid applying adhesive in the weather grooves to maintain a tight, water-resistant seal.
  4. Fixing the Panels: Press the Rock Panel into position on the Gib surface and secure it with screws through the top lip of the panel. Be careful not to overtighten the screws, as this could damage the plasterboard. For additional strength, use screws designed for securing materials to Gib.

Tips for Success:

  • For installations where the Gib is fixed over metal studs, use screws that are compatible with both plasterboard and metal framing.
  • Inspect the Gib for any moisture damage or weak spots, especially in areas prone to humidity, such as bathrooms or kitchens. If any damage is present, repair the Gib before installing the panels.

 


 

Additional Considerations for Mixed Substrates

In some cases, you may be working with mixed substrates, such as a combination of wood and masonry. In these scenarios, it’s essential to prepare each type of surface according to its specific requirements, ensuring proper adhesion and stability across the entire installation. Always use the appropriate primer, adhesive, and fasteners for each material.

Conclusion Rock Panels are designed to be versatile and compatible with a wide range of substrates, making them a great choice for various interior and exterior applications. By understanding the unique requirements for each surface—whether it’s wood, concrete, steel, or drywall—you can ensure a secure, long-lasting installation that enhances the beauty and functionality of your space. With proper preparation and the right materials, installing Rock Panels is a straightforward process that delivers professional results, no matter the substrate.

Coming Soon

Something New...

Our WetWall Panel range is about to expand. Enter your details to be kept up to date.